Dick Miller Racing Inc. proudly presents the

12th Annual Oldsmobile Powered Race/Show Nationals

Norwalk Raceway Park July 19, 2009 in Norwalk OH.

For more information go to dickmillerracing.com or 662-233-2301.

Oldsmobile Heads
EDE-60519 Heads Aluminum Edelbrock 60519 CNC Ported
400 - 455 Oldsmobile Edelbrock Performer RPM non emissions version cylinder heads. Will fit 350-403 by port matching an Edelbrock 7111 RPM intake manifold.

CNC PORTED. GOOD FOR UP TO 700 HP.

Out of the box (EDE-6051) Edelbrock heads flow in the 240 cfm range on the center two intake runners and in the 250 cfm range on the outside two intake runners or equivalent to a stock "C" head. Approximately 77 cc combustion chambers. Assembled with stainless valves, studs, guide plates and valve springs for a hydraulic flat tappet cam.

Approximate flow numbers.
Lift Int Exh
100 072 064
200 149 123
300 212 164
400 269 195
500 307 211
600 322 219
700 337 224
Since these head are CNC ported your heads may vary (+/-) to some degree.

$3,975.00
Quantity:
EDE-60519 Heads Aluminum Edelbrock 60519 Hand Ported
400 - 455 Oldsmobile Edelbrock Performer RPM non emissions version cylinder heads. Will fit 350-403 by port matching an Edelbrock 7111 RPM intake manifold.

HAND PORTED. GOOD FOR UP TO 650 HP.

Out of the box (EDE-6051) Edelbrock heads flow in the 240 cfm range on the center two intake runners and in the 250 cfm range on the outside two intake runners or equivalent to a stock "C" head. Approximately 77 cc combustion chambers. Assembled with stainless valves, studs, guide plates and valve springs for a hydraulic flat tappet cam.

Approximate flow numbers.
Lift Int Exh
100 079 68
200 146 115
300 202 151
400 247 174
500 284 190
600 300 203
700 315 209
Since these head are hand ported and not machined from billet your heads may vary (+/-) to some degree.

$2,875.00
Quantity:
EDE-60519 Heads Aluminum Edelbrock 60519 Out Of Box
400 - 455 Oldsmobile Edelbrock Performer RPM non emissions version cylinder heads. Will fit 350-403 by port matching an Edelbrock 7111 RPM intake manifold.

OUT OF THE BOX. GOOD FOR UP TO 525 HP.

Out of the box (EDE-6051) Edelbrock heads flow in the 240 cfm range on the center two intake runners and in the 250 cfm range on the outside two intake runners or equivalent to a stock "C" head. Approximately 77 cc combustion chambers. Assembled with stainless valves, studs, guide plates and valve springs for a hydraulic flat tappet cam.

Approximate flow numbers.
Lift Int Exh
100 065 053
200 136 103
300 197 139
400 242 167
500 243 182
600 250 189
700 253 192
Since these head are cast and not machined from billet your heads may vary (+/-) to some degree.

$1,675.00
Quantity: